SPECIFICATION AT-366S (Sanstiser Uninal Integrate Flush Valve)
| Power | : Adapter 6Vdc |
| Working | : The system's infrared sensor function. |
| Functions conditions 1 | : Stand for 3 seconds and then release the water sensors 3 seconds. (450 ml.) |
| Functions conditions 2 | : When the sensor is out of the water 6 seconds. (850 ml.) After about 30 seconds to go. Going back to the first state. |
| Range | : 40± 10 cm |
| Water pressure from | : 0.7 – 10 Bar. |
| optional features | : The cleaning itself every 12 hours. |
| Disinfectants box | : Have Sanitizer inside Body |
| Adjustment reagents | : Adjusting the flow rate of Disinfectant up to 4 levels. ON1. 0.05ml. / ON2. 0.08ml./ ON3. 0.16ml./ ON4. 0.20ml. |
| Capacity antiseptic | : 250 milliliter |
| Delay flushing water | : Water 6 times per second. (850 ml.) |
| The water releasing | : Waterfall. |
| installation | : The hanging wall |
| Sewer Outlet | : Wall Mounted. |
| Pipe Fitting | : Ø ½ “ PJ Water inlet |
| Material | : Porcelain ceramics. |
| Urinal Dimension | : 395 x 360 x 780 มิลลิเมตร |
| Water supply | : 10.90 liters of water 1 minute, 6 seconds, 1.08 liters of water. |
*** Green Label requirements for urinal flush valves, driving the nominal size 15 (size 1/2 inch water pipe) to a flow rate of up to 1.6 liters of water at pressure 0.15 ± 0.01 MPa (1.5. bar)
***Testing Standards Institute's Automotive. Our water is a maximum time of 6 seconds, or 1.08 per liter cheaper than the standard set up to 0.52 liters.
automatic soap dispenser
automatic sensor faucet
2-in-1 sensor faucet and sopa dispenser
2-in-1 sensor faucet and sopa dispenser
automatic sensor faucet
automatic sensor faucet